(2025) Best HandBrake Settings for Ripping a DVD to MKV or MP4

Q: “I own a stack of DVDs and a good notebook for travel. I want to rip some DVDs to the notebook disk for watching when stuck somewhere with a good screen indoors and intense rain outdoors. I tested one rip with the default handbrake settings but the output was far smaller than the input. What settings need changing to retain the full quality from the DVD?”

HandBrake is a powerful, open-source video transcoder that can also rip DVDs. However, its ability to rip encrypted DVD is limited. Even with the libdvdcss library downloaded, it can only handle some CSS-protected DVDs. Moreover, the process of re-encoding a DVD to a video is lossy and many factors can affect the final result quality, including the quality of your input source and the HandBrake settings for DVD ripping.

To get the best result, let’s first have a basic knowledge of typical DVD settings. This will help you better achieve the export results you want.

Here is the basic information about DVD:

Video compression: MPEG-2
Audio formats: Audio in DVDs can be formats PCM, DTS, MP2, or AC-3
Video resolution: The typical resolution of DVDs are NTSC (720×480 pixels at 30fps) and PAL (720×576 pixels at 25 fps).
Aspect ratio: The video can be encoded in either 4:3 (standard) or 16:9 (widescreen).
Audio bitrate: 384 kbps or 448 kbps for 5.1 channels and 192 kbps for stereo.
Sample rate: 48 kHz

If you have no special requirements for the ripped DVD movies, you can apply the following optimal HandBrake settings to rip DVD to achieve the best compatibility and also great balance between quality and file size:

General HandBrake settings for DVD:

Preset: HQ 480p30 Surround or HQ 576p25 Surround
This depends on your source resolution, which you can check in the ‘Source’ section after loading the DVD into HandBrake. Don't upscale it to 720p, as it will only increase the file size instead of improving the quality.
Video Format: MP4 or MKV.
Choose MP4 for the best compatibility, but MKV offers more flexibility in storing multiple audio tracks, subtitles, and higher-quality video codecs in a single file.
Video Encoder (under the ‘Video’ tab): H.264 (x264) or H.265(x265)
H.264 (x264) is a widely-supported codec. You can choose it if you don't know what format your device can play, while H.265(x265) provides better compression efficiency, resulting in smaller file sizes at the same quality.
Framerate (FPS): Same as source
Quality: A constant quality between RF 18 and 22
Encoder Preset: Slower or very slow
According to the HandBrake documentation, using the slow preset can give better overall results, but at the expense of longer encoding times.

Then leave other settings by default.

Recommended Best HandBrake Settings to Rip DVD for Quality

As for the best HandBrake settings for DVDs, it mostly depends on your priorities, such as video quality, file size, and encoding speed. For example, if you want to extract the DVD movies with quality as close as the original, you can try the following HandBrake settings:
Video container and codec: MKV H.265(x265)
Frame rate: Same as Source
Constant Quality: 16 or 18
Encoder Preset: Slow or Very Slow
Encoder Tune: Use Film for movies or Animation if the content is animated.
Encoder Profile: High
Encoder Level: 4.1
Deinterlace (under the ‘Filters’ tab): Decomb
Audio codec: AC3 Passthrough
Bitrate: 448 kbps for surround sound, 192 kbps for stereo
Subtitles: enable the ‘Forced Only’ and ‘Burn In’ options

As mentioned above, the DVD re-encoding process in HandBrake may seem complicated, especially for beginners. In addition, HandBrake does not support protected discs. If you prefer a foolproof and simpler HandBrake alternative to rip DVD, consider using WonderFox DVD Ripper Pro.

WonderFox DVD Ripper Pro is a more powerful DVD ripping tool than HandBrake that can rip types of protected DVDs to 600+ presets for format, platforms, and devices. With no complicated setup, it smart fits the best output video settings, making it convenient for novices. Also, advanced customization options are provided for pro users to manage the output quality. Try it out!

WonderFox DVD Ripper Pro allows you to rip any kinds of DVDs, be it homemade or commercial, and choose output format from over 600 profiles based on your needs. After selecting the export format, all output parameters are adjusted automatically and intelligently.

Now, free download this software to start to rip DVDs with the best presets.

The above is all about HandBrake settings for DVD, I believe that with the help of HandBrake and its alternative, we can rip DVDs in the best settings for backup and offline viewing. WonderFox DVD Ripper Pro really does well in ripping DVDs and removing kinds of copy protections. Download it to have a try!

WonderFox HD Video Converter Factory Pro

Convert almost all popular audio and video formats to 600+ presets;
Download SD/HD/FHD/4K videos from 1000+ sites;
Fast compress large videos and audio files in batches;
Record meetings, gameplay, live streams… in HD;

Can HandBrake Extract Audio? The Best HandBrake Alternative in Audio Conversion!

How to Solve HandBrake Copy Protection Ripping Fail with the Best Way

How to Fix Handbrake no Valid Source Found Issues When Ripping DVD

HandBrake ISO – How to Resolve HandBrake ISO to MP4/MKV Problem Effortlessly

How to Rip DVD with Pineapple DVD Ripper and Its Better Alternative

Rip Encrypted DVDs via HandBrake Libdvdcss on Windows